STEP 1 REMOVE OEM BULB FROM HEADLIGHT ASSEMBLY AND REPLACE WITH HID BULB

STEP 2 MOUNT BALLAST AND BRACKET TO SECURE AREA ON THE VEHICLE 

STEP 3 CONNECT MALE AND FEMALE BULB WIRE CONNECTORS (A) TO THE MALE AND FEMALE BALLAST WIRE CONNECTORS (B) 

STEP 4 WITH HEADLIGHTS TURNED ON, USE AN ELECTRICAL TESTER TO FIND

             THE POSITIVE (+) WIRE ON YOUR OEM VEHICLE CONNECTOR  

!! TURN HEADLIGHTS OFF WHEN FINISHED TESTING TO PREVENT ELECTRIC SHOCK!!    

       THIS WILL LEAVE YOU WITH 1 PAIR OF WIRES ONLY 

STEP 5 CONNECT POWER WIRE SIDE ( C ) TO OVAL BALLAST CONNECTOR ( D ) MAKING  SURE THAT LOCKING CLIP ON THE BLACK OVAL CONNECTOR IS FACING OUT (BE SURE THAT THE PINS INSIDE THE FEMALE BALLAST CONNECTOR ARE NOT BENT)

       **IN SOME CASES THE POLARITY OF THE VEHICLE IS REVERSED AND THE LOCKING

       CLIP WILL NEED TO GO TO THE INSIDE OF THE FEMALE BALLAST CONNECTOR** 

STEP 6 NOW CONNECT THE POWER WIRE SIDE (E) TO YOU VEHICLE'S OEM HEALIGHT PLUG (RED OR BLUE WIRE TO POSITIVE AND BLACK WIRE TO NEGATIVE)  

STEP 7 TURN ON HEADLIGHTS AND YOUR HID'S SHOULD WORK, IF YOU HAVE ANY  QUESTIONS OR CONERNS FEEL FREE TO CALL US AT 916-429-1333 10 AM - 5 PM   PACIFIC STANDARD TIME MONDAY - SATURDAY. YOU CAN ALSO GO TO VIDEO CLIPS FOR A VIDEO.

For the 9004 / 9007 / H13 HID Bi-Xenon conversion kit,

White wire is for Low Beam Positive

Brown wire is for Negative

Blue wire is for High Beam Positive