-->




Join our mailing list!









You are here: Home > HID Installation Guide
We found 0 results matching your criteria.

General Installation Guide


STEP 1

 REMOVE OEM BULB FROM HEADLIGHT ASSEMBLY AND REPLACE WITH HID BULB

STEP 2

MOUNT BALLAST AND BRACKET TO SECURE AREA ON THE VEHICLE 

STEP 3

CONNECT MALE AND FEMALE BULB WIRE CONNECTORS (A) TO THE MALE AND FEMALE BALLAST WIRE CONNECTORS (B

STEP 4

 WITH HEADLIGHTS TURNED ON, USE AN ELECTRICAL TESTER TO FIND

             THE POSITIVE (+) WIRE ON YOUR OEM VEHICLE CONNECTOR  

!! TURN HEADLIGHTS OFF WHEN FINISHED TESTING TO PREVENT ELECTRIC SHOCK!!    

THIS WILL LEAVE YOU WITH 1 PAIR OF WIRES ONLY 

STEP 5

CONNECT POWER WIRE SIDE ( C ) TO OVAL BALLAST CONNECTOR ( D ) MAKING  SURE THAT LOCKING CLIP ON THE BLACK OVAL CONNECTOR IS FACING OUT (BE SURE THAT THE PINS INSIDE THE FEMALE BALLAST CONNECTOR ARE NOT BENT)

 

 **IN SOME CASES THE POLARITY OF THE VEHICLE IS REVERSED AND THE LOCKING

              CLIP WILL NEED TO GO TO THE INSIDE OF THE FEMALE BALLAST CONNECTOR** 

STEP 6

NOW CONNECT THE POWER WIRE SIDE (E) TO YOU VEHICLE'S OEM HEALIGHT PLUG (RED OR BLUE WIRE TO POSITIVE AND BLACK WIRE TO NEGATIVE)  

STEP 7

TURN ON HEADLIGHTS AND YOUR HID'S SHOULD WORK, IF YOU HAVE ANY  QUESTIONS OR CONERNS FEEL FREE TO CALL US AT 916-429-1333 10 AM - 5 PM   PACIFIC STANDARD TIME MONDAY - SATURDAY. YOU CAN ALSO GO TO VIDEO CLIPS FOR A VIDEO.

Bi-Xenon Installation Guide


**For the 9004 / 9007 / H13 HID Bi-Xenon conversion kit**

9004 BI-XENON WIRING


9007 BI-XENON WIRING

WHITE WIRE IS FOR LO BEAM POSITIVE

BROWN OR BLACK WIRE IS FOR NEGATIVE (GROUND)

BLUE WIRE IS FOR HI BEAM POSITIVE